SunDing SD - 579 Wired Bike Computer Bicycle Speedometer
...See More
PRIVACY PROTECTED
SECURE CHECKOUT
SunDing SD - 579 Wired Bike Computer Bicycle Speedometer
Availability:
In Stock
|
FREE Shipping on Orders Over $20
ships worldwide |
$17.92
Description:
This speed and cadence sensor accurately track and transmit essential cycling data to you, giving you real-time monitoring of your outdoor exercise.
Features:
- Lightweight and compact, slightly water resistant, a great tool for the cycling outside on a rainy day
- Support multiple languages, let you convenient to choose the most familiar one
- Bike speed sensor attaches to the chainstay of your bike to help you track your speed and other data accurately
- Active tracking, when you are riding, cycling speed, distance and other cycling data will be all shown on the bike computer, which is good to make your riding plan and get a cool riding
- Powered up by a CR2032 button cell battery (included), 500 hours cycling and 2 years standby state
- Easy installation, bicycle table is very easy to install, first with a rubber belt equipped with a bicycle table fixed on the bike, with nylon cable tension can be adjusted freely
Parameters:
Material: ABS
Lifespan: 500 hours
Operating temperature: -20 to 70 Deg.C
Battery: 1 x 3V CR2032 battery (included)
Wire length: 90cm
Riding time: ranging from 0:00:00 to 99:59:59
Bicycle spoke diameter: less than 2mm
Installation Instruction:
1.Computer installation: match the base with the bike computer along with the slide rail. Then using ties to thread the base slots to attach to the handlebar.
2.Speed sensor installation: affix the sensor on the front fork of the bike frame with the zip ties through the bottom square hole. Making sure the bike computer and the sensor are on the same side. The distance between them should be less than 80cm. The sensor shall be fixed moderately by the zip ties close to the end of the pedal crank.
3.Speed magnet installation and positioning: make sure the distance between the sensor and the speed magnet shall be no more than 1.5mm/0.059 inches, align the center position of the speed magnet to the end of the sensor and center position of the cadence magnet to the lower part of the sensor. Tighten the speed magnet, cadence magnet and the zip ties for the sensor in turn.
Note:
Adjust the magnet and the sensor, making sure the distance between sensor and magnets is less than 1.5mm/0.059 inches.
Do not drop a bike sensor or object it to severe shock.
Do not expose it to extreme temperatures and excessive moisture.
Use diluted neutral detergent on a soft cloth to clean a bike sensor.
This speed and cadence sensor accurately track and transmit essential cycling data to you, giving you real-time monitoring of your outdoor exercise.
Features:
- Lightweight and compact, slightly water resistant, a great tool for the cycling outside on a rainy day
- Support multiple languages, let you convenient to choose the most familiar one
- Bike speed sensor attaches to the chainstay of your bike to help you track your speed and other data accurately
- Active tracking, when you are riding, cycling speed, distance and other cycling data will be all shown on the bike computer, which is good to make your riding plan and get a cool riding
- Powered up by a CR2032 button cell battery (included), 500 hours cycling and 2 years standby state
- Easy installation, bicycle table is very easy to install, first with a rubber belt equipped with a bicycle table fixed on the bike, with nylon cable tension can be adjusted freely
Parameters:
Material: ABS
Lifespan: 500 hours
Operating temperature: -20 to 70 Deg.C
Battery: 1 x 3V CR2032 battery (included)
Wire length: 90cm
Riding time: ranging from 0:00:00 to 99:59:59
Bicycle spoke diameter: less than 2mm
Installation Instruction:
1.Computer installation: match the base with the bike computer along with the slide rail. Then using ties to thread the base slots to attach to the handlebar.
2.Speed sensor installation: affix the sensor on the front fork of the bike frame with the zip ties through the bottom square hole. Making sure the bike computer and the sensor are on the same side. The distance between them should be less than 80cm. The sensor shall be fixed moderately by the zip ties close to the end of the pedal crank.
3.Speed magnet installation and positioning: make sure the distance between the sensor and the speed magnet shall be no more than 1.5mm/0.059 inches, align the center position of the speed magnet to the end of the sensor and center position of the cadence magnet to the lower part of the sensor. Tighten the speed magnet, cadence magnet and the zip ties for the sensor in turn.
Note:
Adjust the magnet and the sensor, making sure the distance between sensor and magnets is less than 1.5mm/0.059 inches.
Do not drop a bike sensor or object it to severe shock.
Do not expose it to extreme temperatures and excessive moisture.
Use diluted neutral detergent on a soft cloth to clean a bike sensor.
Package weight: 0.118 kg
Product Size(L x W x H): 3.80 x 4.60 x 1.50 cm / 1.5 x 1.81 x 0.59 inches
Package Size(L x W x H): 8.00 x 12.80 x 3.50 cm / 3.15 x 5.04 x 1.38 inches
Product Size(L x W x H): 3.80 x 4.60 x 1.50 cm / 1.5 x 1.81 x 0.59 inches
Package Size(L x W x H): 8.00 x 12.80 x 3.50 cm / 3.15 x 5.04 x 1.38 inches
Package Contents: 1 x Bike Computer (Battery Included), 1 x Speed Sensor, 1 x Computer Base, 1 x Speed Magnet, 6 x Zip Tie, 1 x Pad
CUSTOMER SATISFACTION
We are doing our best to provide excellent shopping experience at HitMint.com. We made it easy to track, return or contact our outstanding customer service
PRIVACY PROTECTED
We keep our customer's personal information safe and do not sell it to any third- party company
SECURE CHECKOUT
All transactions made through a secure server where the data exchange is encrypted with SSL certificate
