Features: - With high quality metal thick plate, metal dust cover, with strong convection hole for cooling - With full wire joints heat shrink tube wrapped - With large torque ball bearing motor - With pure steel structure drill chuck - Small volume, but with high precision, low-noise - Perfectly designed for home DIY enthusiasts
Specifications: Power: 96W Voltage: DC 12 - 24V Chuck clamping range: 0.6 - 6mm Speed: 4000 - 8000 revolutions per minute seven speed control power supply Theoretical maximum clamping length: 180mm The theory of maximum turning diameter: 70 mm
Precautions: 1. If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations. 2. The speed can be adjusted in 0 - 8000rpm, cut wood should not exceed 4000, grinding can use higher speed. 3. Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut. 4. If not a cylinder, the speed should be reduced. 5. Tailstock bearing without lock tight. 6. When using a knife, locking the bottom of screw, location should be away from timber 1 - 1.5cm. 7. If you do not really understand the operation, it is best to consult a professional person.
Package weight: 1.752 kg Package Size(L x W x H): 42.00 x 10.00 x 9.00 cm / 16.54 x 3.94 x 3.54 inches
Package Contents: 1 x Mini Lathe Beads Machine, 1 x Power Adapter, 1 x EU Plug, 1 x Turning Tool, 1 x Repair Round Device, 3 x Hexagonal Fixing Pin (1.5mm, 2.0mm, 2.5mm), 6 x Graver, 1 x Cutting Piece
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.